Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India
ph: +91 93222 13698
fax: +91 22407 79200
info
CETEX – ADMIXTURES are used to achieve desired properties of concrete like the heat of hydration, accelerate or retard setting time, workability, water reduction, dispersion and air-entrainment, impermeability and durability factors.
CETEX has an array of admixtures which when added to concrete or mortar helps to control setting and early hardening, workability, or provides additional cementing properties. Thus the concrete can attain desired characteristics such as high compressive strength, high workability, and high performance and durability requirement of the modern structures.
POZZO-CAT
CETEX POZZO-CAT is Nano-Silica based hyper-plasticizer. Activated Nano-Silica catalyzes cement and pozzolans, like fly ash, micro-silica, etc., which results in faster reaction in the concrete mix. This results in higher strength and lower porosity. It has excellent dispersing effect, which not only helps in higher workability but also helps in very low water cement ratio in mix design. Thus it results in Better Quality & Durability of the concrete.....Read more
ACRYLIC BOND (AB)
CETEX AB - ACRYLIC BOND is used to bond new concrete, mortar, stucco, tiles, stones, and terrazzo to any structural sound surface, interior and exterior. It can also be used as an admixture in concrete mix to improve strength, chemical resistance and water proofing.....Read MorePSA
CETEX-PSA - Plasticiser & Set Accelerator, helps in reducing the water cement ratio of the concrete mix, decreases the set time and results in higher overall strength. It complies with ASTM-C-494 Type A & C, IS- 9103.....Read More
SUPERPLASTICISER & WATER REDUCER (SPWR)
CETEX - SuperPlasticiser & Water Reducer (SPWR) increases the workability (plasticity) of the concrete mix for constant water to cement ratio. The same level of workability is achieved at reduced water cement ratio. It reduces the water bleeding. It is used as superplasticiser for production of free flowing concrete for slabs, foundations, walls, beams, columns and piers; areas with dense reinforcement, etc. As water reducing agent it is used for early and ultimate high strength concrete such as pre-cast concrete, pre-stressed concrete, bridges, cantilever structure and foundations, etc. It complies with ASTM-C-494 Type A/D, IS- 9103......Read moreSUPER PLASTICISER & WATERPROOFING (SPWP)
CETEX- Super Plasticiser & Water Proofing (SPWP) is an economical super- plasticiser and also acts like an integral water proofing compound in mortar and concrete. It is used as plasticiser for production of free flowing concrete for slabs, foundations, walls, beams, columns; canals, tunnels, mortars, wherever water-proofing is required. It complies with ASTM-C-494 Type A/D, IS- 9103......Read moreSUPER PLASTICISER & SET REDUCER (SPSR)
CETEX – Super Plasticiser & Set Retarder (SPSR) when added in the cementitious mixture, improves workability of concrete mix for constant water to cement ratio and increases the setting time. It is idle for Ready Mix Concrete (RMC) plants. It is used as super plasticiser for production of free flowing concrete for slabs, foundations, walls, beams, columns and piers; areas with dense reinforcement. As a water reducing agent it is also used for early and ultimate high strength concrete such as pre-cast concrete, pre-stressed concrete, bridges, cantilever structure and foundations, etc. It complies with ASTM-C-494 Type D/G, IS- 9103 and BS-5075. It complies with ASTM-C-494 Type A/D, IS- 9103.....Read moreSET ACCELERATOR (SA)
CETEX - Set Accelerator (SA) when added in the cementitious mixture, it decreases the set time of the mix. CETEX-SA is used in production of concrete where early set is required. It is ideal for sprayed or pumped concrete/mortar mix like in shotcrete / guniting and ready mix concrete. It is also suitable for concrete where high early strength is required or formwork has to be removed early, for example reinforced pre cast. It complies with ASTM-C-494 Type C, IS- 9103.....Read moreSET ACCELERATOR - Paver Block (SA-PB)
CETEX – SA - PB (Set Accelerator for Pavers and Bricks) when added in the cementitious mixture, decreases the set time of the mix even during low ambient temperatures. CETEX-SA-PB is used in production of unreinforced concrete where early set is required. It can also be used in reinforced concrete where total chloride is below 1.0% of cementatious matter. It is also suitable for concrete where high early strength is required or formwork has to be removed early. It complies with ASTM-C-494 Type C, IS- 9103.....Read moreCORROSION INHIBITING ACCELERATOR (CIA)
CETEX-CIA (Corrosion Inhibiting Admixture), when added in the fresh concrete mix, inhibits the corrosion of embedded reinforcement steel and other metallic component. It complies with ASTM-G 109.....Read more
Copyright 2011 Waltar Enterprises.
All rights reserved.
Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India
ph: +91 93222 13698
fax: +91 22407 79200
info