ADVANTAGES

• Suitable for various surfaces like concrete, mortar, plywood, cements board, gypsum, tile or stone.
• The stickiness / tackiness are long lasting if protected from moisture, dust, dirt, etc.
• Improved bonding between surfaces increases the durability of construction.
• Improves tensile, flexural properties and abrasion resistance.
• Excellent weather-ability. It can be used on exterior as well as interior surfaces.
• It aides in water proofing and improves resistance to chemicals of the surface.
• It can be white dyed so that one can make out the unapplied surfaces.
• It is water- based, very low VOC. It is eco-friendly.
• Will not yellow, discolour. It is UV stable.
• Non-flammable. Non-toxic. Low odor.

DIRECTION OF USE

• All loose and damaged surfaces should be thoroughly rectified.
• Surface should be free from dust, grease, coatings like curing compounds, etc

As Bonding Agent.

• It can be applied directly on the surface or as bonding slurry. Coverage 3 to 5 sq. mtr./kg.
• Make bonding slurry by adding 3-4 kg cement to mix of 1 liter CETEX BOND and 1 liter water.

As Patching, repair mortar, screed or bonding mortar for tiles, bricks.

• 10-15 kg of diluted BOND (ratio1:1) is added to a mortar mix. The wet mix should be sticky.
• After application, finish the surface to the desired texture with only cement and water slurry.
• Surface should be properly cured to ensure better quality and durability.

Download Brochure

BOND

 

PROPERTIES

Type                           :           Emulsion of acrylic resins

Color                          :           Milky white

Specific Gravity        :           1.03 +/- 0.02 at 25^oC

Solid Content            :           Above 30% w/w