Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India
ph: +91 93222 13698
fax: +91 22407 79200
info
These are polypropylene (PP) synthetic fibers of 24 mm length. These micro fibers are used in concrete mixing machines. They prevent crack formation and provide reinforcement. Maximum size of the aggregate in normal concrete is 19mm (approx.). Being longer than maximum size of aggregate, each and every strand of fiber is effective. CPP24 is used to minimize damage of structures and prevent spalling, in case of fire. Suitable care has been taken to ensure dispersion of fibers. It conforms to ASTM C 1116/C 1116M - 06 4.1.3 Type III & BS EN 14889-2: 2006.
DOSAGE
For crack prevention - 600gm/m3 (minimum); Recommended Dosage - 900gm/m3
For primary reinforcement (in concrete floors/precast) - Above 1000gm/m3.
For Fire Protection of Concrete - 2.0 kg/m3 (minimum)
Results improve with higher dosage of fiber. Kindly optimize the dosage depending on the requirement.
HOW TO USE?
For Machine mixing - Small quantity of water is dosed in empty drum to clean the drum after each batch. Add fibre in the rotating drum. Then add the chips/sand/cement/water in the concrete mixer and continue normal operation.
For dosing in Ready Mix Truck - Add fibres in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions of the drum at maximum RPM.
SPECIFICATION
Material : 100% virgin Polypropylene (PP)
Length : 24.0 +/- 0.25 mm
Diameter : 28 micron (approx.)
Aspect ratio : 860 (approx.)
Melt Point : 162 OC
Specific Gravity : 0.91
Thermal & Electric : Low
Conductivity
Alkali Resistance : 100% Alkali Proof
Acid & Salt Resistance : High
Copyright 2011 Waltar Enterprises.
All rights reserved.
Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India
ph: +91 93222 13698
fax: +91 22407 79200
info