CETEX CONSTRUCTION CHEMICALS & FIBERS

Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India

ph: +91 93222 13698
fax: +91 22407 79200

info@waltar.in

  • Home
  • SILICATE
  • PP CONSTRUCTION FIBER
  • ADMIXTURE
  • MICRO-SILICA
  • NANOSILICA
  • BONDING AGENT
  • CONCRETE DENSIFIER & HARDENER
  • CURING COMPOUND
  • SEALERS
  • DECORATIVE STAIN
  • About Us
  • Contact Us
  • Acrylic Sealer
  • Liquid Sealer
  • Liquid Sealer-Solvent
  • Water Repellent

LIQUID SEALER (LS)


  • LIQUID SEALER (LS)

    CETEX LS (Liquid Sealer) is the mixture of small molecules of silane and siloxane, which forms micro-emulsion when mixed with water. It is safer, faster and easier to apply. Treated surfaces resist liquid penetration without significantly reducing breath-ability of the surface.

     

    MECHANISM

    On application of diluted solution, it reacts with air to form active resins in pores, which prevent penetration of liquid.

     

    ADVANTAGES

    • Can be diluted in water up to 10-20 times.
    • Can be applied on coated or uncoated surfaces.
    • Provides water repellency within 24 hours.
    • Treated surface is breathable. It is UV stable.
    • VOC content is nil, helps earning LEED points as green building.
    • Reduces maintenance, and prevents steel corrosion.
    • Will not yellow, discolour, peel or flake.
    • Non-flammable. Non-toxic. Low odor.
    • It cures quickly and is economical to use.

PROPERTIES

Type                           :           100 % Silane / siloxane

Color                          :           Reddish Orange

Specific Gravity        :           1.06 +/- 0.02 at 25oC

Dilutent                      :           Clean soft water

 

COVERAGE

Diluted solution can be covered over 150 sq. ft/litre (approx.). However, field trials should be conducted to determine the optimum dilution and coverage to achieve the required result.

 

DIRECTION OF USE

  • Dilute at least 10-20 times with soft water only.
  • Take trial of small quantity to finalise the dilution ratio.
  • Apply by brush, spray or by flooding the surface.
  • Use the diluted mixture within 72 hours.
  • Do not wash the surface for 24 hours after application.
  • Wipe out splashes, if any, by soap water or organic solvent.

 

PACKING

CETEX-LS is available in 25kg pack. Other pack sizes available on request.

CETEX LS

Download Brochure

CETEX LS

 



STORAGE

Store in frost-free condition away from sunlight or extreme heat. For best result, use within one year.

Copyright 2011 Waltar Enterprises.

All rights reserved.

Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India

ph: +91 93222 13698
fax: +91 22407 79200

info@waltar.in