CETEX CONSTRUCTION CHEMICALS & FIBERS

Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India

ph: +91 93222 13698
fax: +91 22407 79200

info@waltar.in

  • Home
  • SILICATE
  • PP CONSTRUCTION FIBER
  • ADMIXTURE
  • MICRO-SILICA
  • NANOSILICA
  • BONDING AGENT
  • CONCRETE DENSIFIER & HARDENER
  • CURING COMPOUND
  • SEALERS
  • DECORATIVE STAIN
  • About Us
  • Contact Us
  • Lithium Densifier
  • Potassium Lithium Silicate
  • Liquid Potassium Densifier
  • Liquid Surface Hardener

POTASSIUM LITHIUM SILICATE (POLISI)


  • POTASSIUM LITHIUM SILICATE (POLISI)

    CETEX POLISI - Potassium Lithium Silicate is a premium mix silicate. It hardens a wide variety of cementatious surfaces. When POLISI is applied, it penetrates the surface and it reacts with the free calcium hydroxide to produce a by-product, which fills up the pores on the surface.

     

    ADVANTAGES                              

    • Penetrates into the surface to harden and decrease the porosity of the surface.
    • It improves the light reflectance and on polishing the surface results in permanent and attractive sheen.
    • It provides a tough protected surface that does not discolour or show pedestrian or vehicular wear marks.
    • Improves the abrasion resistance of the surface.
    • It does not cause efflorescence and is more stable than sodium.
    • It improves the chemical resistance of the surface.
    • Protects the surface against scratching or peeling thus making it dustproof.
    • Concentrated for easy transportation and can be easily applied.
    • It can be applied in both new as well as old constructions.
    • It is economical to use.

PROPERTIES

Total Solids Content             :           29.70% approx.                          

Specific Gravity at 25°C       :           1.26 +/- 0.02

pH                                           :           Alkaline  

VOC Content                         :           Nil

 

Application Methods

  • Clean the surface before application. If there is coating on the surface, for example curing compound etc., it should be removed. Fill and repair all holes, cracks and deteriorated areas. For best result, the surface should be dry to allow POLISI penetrate the pores and react.

 

  • For good result POLISI is diluted with water in 1:3 ratios. It can be applied on clean surface by using a low-pressure sprayer or by spreading evenly with a soft-bristled broom.

 

  • For Horizontal surfaces, apply enough diluted POLISI to keep the surface wet for 20 minutes. If areas dry out before that, apply more diluted POLISI. In hot, dry or windy conditions dampen concrete before application to prevent flash drying. Remove any dried powder residue using a stiff broom, power sweeper or floor scrubbing machine. For immediate, enhanced shine, buff or burnish the dry concrete surface in both directions using an orbital floor machine or burnisher equipped with an appropriate polishing pad. This is a dry buffing operation.

 

  • For vertical surfaces, apply from the bottom up. For maximum penetration and desired coverage rates, a wet-on-wet application is recommended; retreat within three to five minutes after initial application. Repeated applications should be made until the surface remains moist for a minute or so before solution disappears

 

  • Restrict usage of the treated surface for 8 hours.

CETEX POLISI

 Download Brochure

CETEX POLISI


PACKING

CETEX POLISI is available in 60 kg carboy or 250 kg barrel.

 

STORAGE

When stored in an airtight, sealed container in normal conditions has a shelf life of 12 months from date of shipment.

Copyright 2011 Waltar Enterprises.

All rights reserved.

Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India

ph: +91 93222 13698
fax: +91 22407 79200

info@waltar.in