CETEX CONSTRUCTION CHEMICALS & FIBERS

Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India

ph: +91 93222 13698
fax: +91 22407 79200

info@waltar.in

  • Home
  • SILICATE
  • PP CONSTRUCTION FIBER
  • ADMIXTURE
  • MICRO-SILICA
  • NANOSILICA
  • BONDING AGENT
  • CONCRETE DENSIFIER & HARDENER
  • CURING COMPOUND
  • SEALERS
  • DECORATIVE STAIN
  • About Us
  • Contact Us
  • 6mm FIBER
  • 12mm FIBER
  • 24mm FIBER
  • 40mm FIBER
  • 50mm FIBERS
  • GRADED FIBER

12mm length CETEX POLYPROPYLENE CONSTRUCTION FIBERS 


  • CETEX - CPP12

    These are polypropylene construction fibres of 12 mm cut length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in mortar where thickness of plaster is 10 mm or more. They are suitable for waterproofing or repair of structures. They are also used in concrete, where mixing is manual. Suitable care has been taken to ensure dispersion of fibres in the mix. It conforms to ASTM C 1116/C 1116M – 10a 4.1.3 Type III & BS EN 14889-2: 2006.

     

    DOSAGE

    Minimum Dosage - For concrete- 600gm/m3                           For mortar– 900gm/ m3

    For Fire Protection of Concrete - 1.0 Kg/m3 (min.)

    Results improve with higher dosage of fiber. Kindly optimize the dosage depending on the requirement.

HOW TO USE?

For Machine mixing - Small quantity of water is dosed in empty drum to clean the drum after each batch. Add fibre in the rotating drum. Then add the chips/sand/cement/water in the concrete mixer and continue normal operation.

For Manual Mixing - The fibers are dosed in a bucket half filled with water. The water in stirred vigorously, which disperses the fibers. The water and fiber mixture is spread over the other cementatious mix.

For dosing in Ready Mix Truck - Add fibres in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions of drum at maximum RPM.

 

SPECIFICATION

Material                              :        100% Virgin Polypropylene (PP)

Length                                 :        12.0 +/- 0.25 mm

Diameter                            :         24 micron (approx.)

Aspect ratio                        :        500 (approx.)

Melt Point                          :         162 OC

Specific Gravity                  :         0.91

Thermal & Electric            :         Low
Conductivity

Alkali Resistance                :        100% Alkali Proof

Acid & Salt Resistance      :        High

CPP12

 

Download Brochure
CETEX CPP12



Copyright 2011 Waltar Enterprises.

All rights reserved.

Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India

ph: +91 93222 13698
fax: +91 22407 79200

info@waltar.in