Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India
ph: +91 93222 13698
fax: +91 22407 79200
info
These are polypropylene (PP) macro construction fibers of 50 mm length for reinforcement in concrete. The long length of the fibre holds different components of concrete together, thereby providing a better reinforcement thus increases the strength and properties of concrete. It has been used in floorings, roads, slabs and other load bearing structures. A special treatment is done on the surface of fibre for better dispersion in concrete mix. It conforms to ASTM C 1116/C 1116M - 06 4.1.3 Type III & BS EN 14889-2: 2006
DOSAGE
For secondary reinforcement - Above 600gm/m3
For primary reinforcement (in concrete floors/precast) - Above 1000gm/m3.
Results improve with higher dosage of fiber. Kindly optimize the dosage depending on the requirement.
HOW TO USE?
For Machine mixing - Small quantity of water is dosed in empty drum to clean the drum after each batch. Add fibre in the rotating drum. Then add the chips/sand/cement/water in the concrete mixer and continue normal operation.
For dosing in Ready Mix Truck - Add fibres in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions of the drum at maximum RPM.
SPECIFICATION
Material : 100% virgin Polypropylene (PP)
Length : 50.0 +/- 2.0 mm
Diameter : 40 micron (approx.)
Aspect ratio : 1250 (approx.)
Melt Point : 162 OC
Specific Gravity : 0.91
Thermal & Electric : Low
Conductivity
Alkali Resistance : 100% Alkali Proof
Acid & Salt Resistance : High
Copyright 2011 Waltar Enterprises.
All rights reserved.
Waltar Enterprises
DBS House, Prescott Road,
Opp. Cathedral Sr. School, Fort,
Mumbai, Maharashtra 400 001 INDIA
India
ph: +91 93222 13698
fax: +91 22407 79200
info