DIRECTION OF USE

For site mixing - Add fiber in the drum after adding some water (which is added to clean the drum after each batch). Then add chips/sand/cement/water in the concrete mixer and continue normal operation.

For Manual Mixing - The fiber is dosed in a bucket half filled with water. The water in stirred vigorously, which disperses the fiber. The water and fiber mixture is sprinkled over the other cementatious mix.

For dosing in Ready Mix Truck - Add fibres in the rotating drum and allow extra revolutions of drum in maximum RPM possible.

SPECIFICATION

Material                                  :           Virgin PP

Length                                     :           6.0 +/- 0.25 mm 

Diameter                                 :           24 micron (approx.)

Aspect ratio                            :           250 (approx.)

Melt Point                               :           162 ^OC

Specific Gravity                      :           0.91

Thermal & Electric                :           Low
Conductivity

Alkali Resistance                    :           100% Alkali Proof

Acid & Salt Resistance          :          High